• E.O.B. Ogedengbe and G.F. Naterer (2004) “Three-Dimensional Distributed Mass Weighting for Non-Inverted Convective Skew Upwinding”, AIAA Journal of Thermophysics& Heat Transfer, vol. 18, pp. 502 - 510 (http://dx.doi.org/10.2514/1.8025)
• E.O.B. Ogedengbe and G.F. Naterer (2004) “Non-Inverted Skew Upwind Scheme for Three Dimensional Convective Transport”, Numerical Heat Transfer B, vol. 46, no. 2, pp. 141 - 164 (http://dx.doi.org/10.1080/10407790490449408)
• E.O.B. Ogedengbe and G.F. Naterer (2005) “Preconditioned Solver Performance with Compressed Banded Data Format in 3-D Convective Heat Transfer Simulations”, Numerical Heat Transfer A, vol. 48, no. 10, pp. 965 – 985 (http://dx.doi.org/10.1080/10407780500283366)
• E.O.B. Ogedengbe, G.F. Naterer and M.A. Rosen (2006) “Slip Flow Irreversibility of Dissipative Kinetic and Internal Energy Exchange in Microchannels”, Journal of Micromechanics and Microengineering, vol. 16, no. 4, pp. 2167 - 2176 (http://dx.doi.org/doi:10.1088/0960-1317/16/10/033)
• E.O.B. Ogedengbe, G.F. Naterer and M.A. Rosen (2007) “Convective Exergy Losses of Developing Slip Flow in Microchannels”, International Journal of Exergy, vol. 4, no. 4, pp. 384-400 (http://dx.doi.org/10.1504/IJEX.2007.015080)
• E.O.B. Ogedengbe and G.F. Naterer (2007) “Convective Flux Dependence on Upstream Flow Directionality in Finite Volume Computations”, Numerical Heat Transfer A, vol. 51, no. 7, pp. 617 – 633 (http://dx.doi.org/10.1080/10407780600939651)
• E.O.B Ogedengbe and G.F. Naterer (2008) “Finite Volume Computation of Convective Exergy Losses in Microfluidic Devices”, International Journal of Exergy, vol. 5, no. 2, pp. 117-131 (http://dx.doi.org/10.1504/IJEX.2008.016670)
• E.O.B. Ogedengbe (2009) “Thermal Management with Solid-Fluid Slip Irreversibility Treatment in Conjugate Micro Devices” Journal of Thermodynamics, Article ID 176495, pp. 1-7 (http://dx.doi.org/10.1155/2009/176495)
• E.O.B. Ogedengbe and M.A. Rosen (2012) “Electro-kinetic Pumping with Slip Irreversibility in Heat Exchange of CSP-Powered Bio-Digester Assemblies”, Entropy, vol. 14, pp. 2439-2455 (http://dx.doi.org/10.3390/e14122439)
• E.O.B. Ogedengbe (2013) “Optimization of Thermal and Electric Loads in Residential and Commercial Buildings with Demand Side Monitoring”, Smart Grid and Renewable Energy, vol. 4, no. 7A, pp. 16-26 (http://dx.doi.org/10.4236/sgre.2013.47A003)
• E.O.B Ogedengbe, R.U. Eteure, and M.A Rosen (2013) “A Modified PMV Model for Indoor Thermal Comfort Analysis: Case Study of a University Cafeteria”, The Open Renewable Energy Journal, vol. 6, pp. 29-40 (http://dx.doi.org/10.2174/1876387101306010029)
• O. Babarinsa, E.O.B. Ogedengbe, and M.A. Rosen (2014), “Mixing Performance of a Suspended Stirrer for Homogenizing Bio-degradable Food Waste from Eatery Centres”,Sustainability, 6(9), pp. 5554-5565 (http://dx.doi.org/10.3390/su6095554)
• I.B. Seidu, E.O.B. Ogedengbe, and M.A. Rosen (2015), “Heat Management in a Campus Cafeteria with Optimal Insulation Thickness for Thermal Comfort of a Space-variant Manikin”, Int. J. of Process Systems Engineering, vol. 3, n. 1-3, pp. 126-148 (http://dx.doi.org/10.1504/IJPSE.2015.071432)
• M.B. Shitta, E.O.B. Ogedengbe, and M.A. Rosen (2015), “Absorbance and Thermal Diffusion Characteristics of Charged Ion in Organic Photovoltaic Solar Cell”, Int. J. of Process Systems Engineering, vol. 3, n. 4, pp. 248-267 (http://dx.doi.org/10.1504/IJPSE.2015.075109)
• I.A. Kayode, E.O.B. Ogedengbe, and M.A. Rosen (2016), “Design of Stirrer Impeller with Variable Operational Speed for a Food Waste Homogenizer”, Sustainability, 8(5), 489, pp. 1-23 (http://dx.doi.org/10.3390/su8050489)
• M.B. Shitta and E.O.B Ogedengbe (2016) “Performance Modelling of Mimosa pudica Extract as a Sensitizer for Solar Energy Conversion”, Energy & Policy Research, vol. 3, n. 1, pp. 42-49 (http://dx.doi.org/10.1080/23815639.2016.1255859)
• E.O.B. Ogedengbe, K.L. Olaitan and G.F. Naterer (2017) “Tri-quadratic Skew Upwind Scheme for Scalar Advection in a Control Volume Finite Element Method”, Numerical Heat Transfer, Part B: Fundamentals, vol. 71 (6), pp. 1-21, (http://dx.doi.org/10.1080/10407790.2017.1309188)
• E.O.B. Ogedengbe and F.D. Ajibade (2017) “Improved Burner Efficiency and Fuel Consumption in Domestic Cooking Appliances”, Energy & Policy Research, vol. 4 (1), pp. 29-35, (http://dx.doi.org/10.1080/23815639.2017.1324331)
• O.O. Ibhadode, E.O.B. Ogedengbe, and M.A. Rosen (2017), “Performance Characterization of Gas-Solid Cyclone for Separation of Particle from Syngas Produced from Food Waste Gasifier Plant”, European Journal of Sustainable Development Research, vol. 1(2), 13 (http://dx.doi.org/10.20897/ejosdr.201713)
• E.O.B. Ogedengbe, I.B. Seidu and M.A. Rosen (2018), “Balancing Comfort and Energy Use for Sustainable Buildings: Thermal Comfort Modeling using a Space-variant Manikin”, European Journal of Sustainable Development Research, vol. 2(1), 07 (http://dx.doi.org/10.20897/ejosdr/63225)
• E.O.B. Ogedengbe, O. Igbekoyi, A. Bakare, O.J. Alonge, M.B. Shitta and M.A. Rosen (2018), ‘Flexibility of Organic Thermoelectric Material for Photovoltaic Solar Energy Management and Conservation’, The Open Fuels and Energy Science Journal, vol. 11, pp. 44-54 (http://dx.doi.org/10.2174/1876973X01811010044)
• E.O.B. Ogedengbe, O.I. Saka, G.E. Azeez and N.A. Tiamiyu (2017) “Energy Assessment Performance of Air-conditioners with Thermal Comfort Modelling in an Indoor Environment”, Journal of Engineering Research, vol. 22(1), pp. 59-71 (http://ujh.unilag.edu.ng/index.php/jer/index)
• J.O. Olofinkua and E.O.B. Ogedengbe, (2018), “Personalized Ventilation System Modelling for a Metabolic-variant Manikin in an Asymmetrical Building Environment”, Unilag Journal of Medicine, Science and Technology, vol. 6(1), pp. 83-96 (http://jsrd.unilag.edu.ng/index.php/ujmst/issue/view/41)
• E.O.B. Ogedengbe and A.O. Adesina (2019) “Leak Detection and Propagation Forecast in West African Gas Pipeline”, Journal of Engineering Research, vol. 23(2), pp. 1-15 (http://ujh.unilag.edu.ng/index.php/jer/index)
• E.O.B. Ogedengbe, P.A. Adepoju, D.C. Nkwaze, J.B. Aruwajoye and M.B. Shitta (2019) “Optimization of Energy Performance with Renewable Energy Project Sizing using Multiple Objective Functions”, Energy Reports, vol. 5, pp. 898-908 (https://doi.org/10.1016/j.egyr.2019.07.005)
• M.B. Shitta, E.O.B. Ogedengbe, O.B. Familoni, and O.T. Ogundipe (2020) “Enhancement of the Photovoltaic Potential in Mimosa Pudica-Based Dye for Sensitization of the Working Electrode in the Construction of Solar Cell”, Journal of Solar Energy Engineering: Including Wind Energy and Building Energy Conservation, (paper in print)
• E.O.B. Ogedengbe, J.O. Odeleye, D.R. Enavreba, O. Awosanya and A. Ehinmowo (2020) “Enhanced Recovery of the Heat of Pyrolysis from a Solar Thermal Collector for Thermochemical Conversion of Food Waste”, Journal of Solar Energy Engineering: Including Wind Energy and Building Energy Conservation, (paper in print)